Even if you are doing the most basic cosmetic repairs in your apartment, it is recommended to check the condition of the plumbing. In many cases, it is necessary to replace the old faucet in the kitchen with a new one . To do this, you will need the following materials and tools:
new mixer;
sealing materials (FUM tape, plumbing flax);
keys.
You may also find a screwdriver, a flashlight and a basin of water useful.
Stages of work:
Dismantling
First, you need to remove the old faucet. Before that, turn off the water. To prevent the remaining water from damaging the floor coverings, use a basin and a rag.
Using a wrench, disconnect the old hoses.
Unscrew the nut that secures the mixer to the sink.
Remove the old faucet.
Assembly
Before installing a new mixer, it must be assembled. The spout is inserted into the body and the nut is tightened. You also need to connect the supply line. Where there are no gaskets, you must use FUM tape. Try not to tighten the nuts too much so as not to damage the threads or gaskets.
Installation
After assembly, proceed directly to installing the mixer on the sink. It is best to do this when the sink is not built into the countertop. The hoses are inserted into a special hole. A nut is put on the stud from below and tightened.
It is essential to use washbasin protection spacers. The installed mixer should not wobble.
Connection
The hoses from the mixer are connected to the water supply pipes. It is important not to confuse the pipes with hot and cold water. For convenience, you can install taps. With their help, you can easily turn off the water in case of repair of the mixer.
Checking
The installation of the mixer in the kitchen is completed with a check. This is done as follows:
Turn on the hot water, then the cold water.
Check all connections for leaks.
If there are leaks, find the cause. Most likely, you damaged the seal and it needs to be replaced with a new one.
As you can see, replacing an old kitchen faucet with a new one is a simple procedure. The main thing is to follow the instructions and use high-quality plumbing materials.
